Pre-Owned 2017 Biesse Jade 225 Edgebander

« ‹ of 5 › »

JADE 225 series is an Automatic single-sided edgebanding machine for the application and processing of flat edge-banding material in rolls and in strips

 STANDARD FEATURES

  • Control system
  • Selectors to enable working units.
  • Control board at the infeed of the machine.
  • It includes 2 displays for managing and displaying of the temperature of the glue pot and the glue roller.

STRUCTURAL COMPONENTS

  • Conveyor Track: it uses an industrial chain with pads realized in special self-lubricating techno-polymer. The pads slide on two guides, one with a circular section and the other flat, complete with grease nipples. The panel being edged is held by special low-wear rubber pads with a high friction coefficient, which are individually interchangeable.
  • Gear motor: for feed chain driving with 12 meter/min working speed.
  • Top presser beam: with high rigidity, allows the change of the panel thickness without set-ups on the operating units. The panel being edged is held in position by a double row of staggered wheels mounted on bearings. The top working units are hooked to the top presser and adjusted automatically with the positioning of the presser itself. The top presser beam movement is manual and centralized.
  • Lateral panel support: it includes extruded aluminum guide complete with support wheels.
  • Protection booth.

ELECTRIC SYSTEM REQUIREMENTS

  • Protection of the machine against indirect contacts has been designed for TN type supply networks, so no differential protection has been foreseen. In the event of connection to other types of network (TT, IT) or if require by local laws or regulations, differential protection must be provided according to the characteristics of the system and taking into account electromagnetic interference containment devices may produce considerable high frequency dispersion currents.

TECHNICAL CHARACTERISTICS

  • Panel height 10-60 mm
  • Height of edge-banding material 14-64 mm
  • Thickness of edge-banding material in rolls 0.4-3 mm
  • Thickness of edge-banding material in strips (*) 0.4-8 mm
  • Panel protrusion from track 25 mm
  • Min panel length 150 mm
  • Min panel width (with length 150 mm) 85 mm
  • Min panel width (with length 250 mm) 50 mm
  • Track feed speed 12 m/min
  • Dust extraction system for each operating unit 1 hood Ø 100 mm
  • Pneumatic connection 7 bar
  • Working voltage 400 V / 50 Hz threephase+neutral
  • Control voltage 24 V - DC
  • Static frequency inverter 200 Hz
  • Glue pot capacity 2 (approx.) Kg
  • Glue pot heating time at ½ load 10 (approx.) minutes

 SINGLE-SIDED EDGEBANDER - JADE 225 

  • SLOT FOR PRE-MILLING UNIT RT02
  • GLUING UNIT SP03
    • Applies the hot melt glue on the panel, feeds the edge to be applied to the panel being machined, automatically cuts the rolls of edge-banding material to length and presses the applied edge ensuring that it adheres perfectly to the panel.
    • It includes:
      • Glue pot and glue spreading roller: the spreading roller is complete with a copying system to apply the correct amount of glue to the panel. Manual device for the quick exclusion of the glue pot. Quick heating and double thermostat for differentiated temperature control. The glue pot is completely coated with non-adhesive material. Automatic glue temperature lowering in the glue pot when the machine has been idle for a set period of time.
      • Quick change of the glue pot for an easy maintenance or change colour/type of glue.
      • Pneumatic edge feeding system: it is automatic for edges in rolls and manual for edges in strips, complete with roll holder disk.
      • Cutter knife: for the automatic cutting of edge-banding material in rolls with a maximum thickness of 3 mm and with a maximum section of 140 mm². Placed before of the 1st edge pressing roller.
      • Edge pressing system. Consisting of:
      • A first motorized roller, diameter Ø90 mm.
      • Two idle rollers, diameter Ø60 mm.
  • END TRIMMING UNIT IT03 
    • Carries out the trimming of edge excess at the front and rear part of the panel.
    • Complete with 2 high frequency motor (0.8 kW) at 12.000 RPM with saw blade.
    • Pneumatic device with pre-selection of straight or tilted cut of the edge from control panel
  • FINE TRIMMING UNIT RF02
    • Carries out top and bottom fine trimming of the glued edge.
    • Complete with 2 high frequency motors (0.65 kW each) at 12.000 RPM, suction hood and front and vertical rotating disk copiers.